Infant Radiant Warmer (HKN-90 HKN-90AP)

No Comments on Infant Radiant Warmer (HKN-90 HKN-90AP)

Infant Radiant Warmer (HKN-90 HKN-90AP)

Infant Radiant Warmer (HKN-90 HKN-90AP)


Onemed


Product brief introduction
Air-them servo-controlled by micro-computer; skin temperature sensor inspects bed temperature; touch with panel, LED digital display, heating power rate indicates 0~100%; three self-check alarms with audible and visible; radiator horizon angle can be adjusted in two ways; bassinet obliquity is  adjustable five steps; organic glass guard around can be disassembly; HKN-90AP have APGAR timer that can continually circulating time for 24 hours, it will alarm at 50” ~ 1 or 4’ 50” ~ 5 or 9’ 50” ~ 10’ with audible and visible


 

  • Standard Configure
    • Radiator
    • APGAR timer (for HKN-90AP)
    • Far infrared quartz heater
    • Temperature controller
    • I.V Pole
    • Skin temperature sensor
    • Mattress
    • Bassinet
    • Power cord
    • Stand
  • Operational condition
    • Environment temp 18°C~30°C
    • Environment relative humidity <80%
    • Environment air velocity of flow <0.3m/s
    • Temperature control range 25°C ~ 37°C
    • Temperature sensor accuracy < 0.3°C
    • Mattress temperature uniformity : < 2.0°C Temperature rise
    • time < 38min
    • Radiator horizon angle 0° ~ 90° two ways adjustment
    • Mattress tray dimension 750 x 480mm
    • Mattress tray max.load 10kg
    • IV pole max.load 2kg
    • Shelf max.load 2kg
    • APGAR alarm time 50”~1’ or 4’ 50”~5’ or 9’ 50”~10”
    • Activated it runs to above time with audible and visible
  • Three systems alarm identification
    • With audible and visible cut off power of heater when alarm accurs display actual temperature
    • High temp cut out alarm
      • Activated if display temperature exceeds 38°C
      • Temperature deviation alarm
      • Activated display temperature is above or below 1°C than set point
    • Sensor alarm
      • Activated  if sensor is short circuit, open circuit or place out of right position
  • Power supply requirement
    • AC220V, 50Hz
  • Power requirement
    • < 1000VA
  • Packing size
    • 111 x 6.5 x 115 cm
  • Gross weight
    • 60kg

Switch to our mobile site